There Are Steps to Take When Preparing a Home For an Electric Car

July 24 02:27 2020
There Are Steps to Take When Preparing a Home For an Electric Car

As electric vehicles become more popular, more homeowners are taking steps to learn how to install an EV charging station in their home. After all, if it’s not possible to charge the vehicle, there’s no point in buying it.

While the process may seem daunting, it doesn’t have to be. With the help of professionals like https://www.airnowhvac.com/ and the information found below, it is possible to learn what needs to be done to install this charging station.

Locate the Home’s Power Panel

The power panel is the most important part of the equation. This is what distributes electricity to the entire house. It is rated for a max level of current flow, which is measured in amps. Older panels installed before 1965 are rated at 60 amps, and newer systems are rated at 100 amps.

It is possible to determine the capacity of a panel by opening the door and finding information printed on the main circuit breaker responsible for controlling the inflow of electricity to the system.

Audit the Total Power Consumption in the Home

The AMP rating is the max usage indicator. It is important to figure out the amount of electrical energy the home is consuming before installing a 240v Level 2 EV. That’s because the consumption of energy by the charger, along with the current consumption, may overload the distribution panel. While it is possible to use the guide provided by the Department of Energy, it’s also possible to get help from AirNow Cooling and Heating.

Contact an Electrician and Consider the Power Panel in Place 

If the electricity audit shows there is enough capacity, the next step is to either add a hardwired circuit back to the home’s power panel or a dedicated 240-volt plug. Both of these installations should be handled by the professionals at https://www.airnowhvac.com/contact/, as they know what to do and how to do it. Keep in mind, the cost of installation needs to be considered, as it can add a significant amount of money to the total project.

There may be additional costs, too, if the power panel is not up to the task of the additional power consumption. If this happens, it will be necessary to upgrade to an increased amperage. The work will cost between $1K and $3K depending on how complex the system is. In the worst situation, the electrician may state that new cabling is required back to the power-pole in the street to ensure the additional capacity. This type of infrastructure upgrade will add to the cost, along with ancillary costs such as the removal of concrete.

The Installation of the EV Charger 

Once the initial considerations are made, the next step is to purchase and install the EV charger. Do not attempt this without the help of the professionals. They will ensure the proper steps are taken to safeguard the installation and minimize issues that may arise with a DIY installation. Being informed and knowing the steps to take is the best way to ensure the desired results are achieved.

Media Contact
Company Name: AirNow Cooling & Heating
Contact Person: Terry Barrett
Email: Send Email
Phone: (334) 285-7065
Address:3481 Main St.
City: Millbrook
State: AL
Country: United States
Website: www.airnowhvac.com

  Categories: